TD 92816EN
17-July 2012 / Ver. B
29
Programming and Installation Manual
Care Phone
6
Battery Replacement
6.1
Battery replacement for the Care Phone
• When the battery needs replacing (i.e., when the Care Phone sends accumulator
alarms) do the following:
• Remove the back cover of the Care Phone.
• Switch off the appliance using the power switch and unplug all connectors from the
Care Phone.
• Remove the screw from the battery holder (see image 9) with a T8 torx screwdriver. Pull
out the battery holder (see image 10).
• Disconnect the cable on the spent battery and connect a new battery (see image 11).
• Slide the battery holder in place (press the SIM card if the battery holder does not slide
easily) and attach it with the screw
• Replace all cables and the cover.
Image 9
.
Unscrew the
battery holder.
Image 10
.
Pull out the
battery holder.
Image 11
.
Loosen the cable and
connect the new
battery holder
