Asco Power Manager Xp 5200 Series, Operator'S Manual

Page: 40 / 42

These are the screens for a
3 Ø, 4–wire wye system and
monitored source is Load.
Screens may be different
for other electrical systems
or other monitored sources.
Not used for 3 Ø, 3–wire
or 1 Ø, 2–wire systems.
Not used for 1 Ø systems.
These screens vary
depending on the type
of system selected.
Data is updated
approximately
every half second.
4--1
Operating the Power Manager
Operation
From the top level display the 5200 Series Power Manager Xp can show the
following information about the electrical power system:
S
system totals (kW, kVAR, kVA, PF, Hz, position of ATS)
S
current & voltage (line–to–neutral & line–to–line) – all phases
S
power (kW), kVARs, kVA, & PF (power factor) – all phases
S
Watt demand and maximum Watt demand, and time stamp
S
average current & voltage (line–to–neutral & line–to–line)
S
unbalance % amps & voltage (line–to–neutral & line–to–line)
S
neutral current (if neutral is connected to Power Manager)
S
kW hours (imp, exp, net) for Normal & Emergency sources
S
kVAR hours (lag, lead, net) for Normal & Emergency sources
S
8 inputs and 4 relay outputs
S
active alarms based upon setpoint configurations
S
Device 86 status
S
ID screen
Step Press Display Shows Comment
1
POWER SYSTEM TOTAL
404 KW +1.00 PF
0 KVAR 60.00 Hz
404 KVA ATS
o
n NORM
Shows totals for
kW, kVARs, kVA,
PF, frequency,
and position of
the ATS.
2
f
AMPS V–LN V–LL
A 1021 121 208
B 1021 121 208
C 1021 121 208
Shows current &
voltage (line–to–
neutral, line–to–
line) all phases.
3
f
WATTS VARs VAs
A 123K 0K 122
B 156K 0K 122
C 125K 0K 122
Shows power
(kW), kVAR, &
VA on all phases.
4
f
WATTS VARs PF
A 123K 0K +1.00
B 156K 0K +1.00
C 125K 0K +1.00
Shows power
(kW), kVAR, &
power factor
on all phases.
5
WATT DEMAND
INST 0000 KW
MAX 0000 KW
12/20/00 3:55
Shows Watt
demand
(instantaneous
and maximum)
and time stamp.
6
AVERAGE UNBAL
AMPS 1127 26%
V–LN 120 1%
V–LL 209 1%
Shows average
current & voltage
(line–to–neutral
& line–to– line) .
7
ADDITIONAL STATUS
CT4 1046 AMPS
Shows neutral
current if neutral
is connected to
Data Monitor.
(continued on next page)