3--10 Initial Set up
Reset Energy Level, Reset Event Log, Set Backlighting
Reset Energy Level
S
Energy registers are updated approximately once per second and
stored into non–volatile (EEPROM) storage once every 15 minutes.
This screen allows the user to clear the Power Manager Xp’s non–
volatile memory for base energy level.
Reset Event Log
S
The Event Log records setpoint activity (parameter, cause, time/date
stamp) and holds a maximum of 100 most recent events. This screen
allows the user to manually clear this log.
Backlighting
S
The Backlighting setting determines the length of time the LCD
backlight stays active when the unit is unattended. You can select
OFF, ON (continuous), or 1–1999 minutes.
Step
Press
Display Shows
Comment
1
POWER SYSTEM TOTAL
404 KW
+1.00 PF
0 KVAR
60.00 Hz
404 KVA ATS
o
n NORM
Brings you to
top level if not
already there.
2
<<< SETTINGS >>>
System: 3
f
–4W WYE
Source: LOAD
KW Capacity:
0 KW
3
<<< SETTINGS >>>
Clear Energy?
NO
Clear Event Log?
NO
Backlighting:
10 min
Press left & right
arrow keys until
the clear energy
location appears.
4
<<< SETTINGS >>>
Enter password
0000
Enter password
as explained in
steps 5 & 6 on
page 3–1.
5
<<< SETTINGS >>>
Clear Energy?
NO
Clear Event Log?
NO
Backlighting:
10 min
The Clear Energy
word NO
is blinking.
6
<<< SETTINGS >>>
Clear Energy?
YES
Clear Event Log?
NO
Backlighting:
10 min
Press up & down
arrow keys until
the word YES
appears.
7
<<< SETTINGS >>>
Clear Energy?
NO
Clear Event Log?
NO
Backlighting:
10 min
Clears energy
register to 0.
Changes back to
NO.
8
<<< SETTINGS >>>
Clear Energy?
NO
Clear Event Log?
NO
Backlighting:
10 min
The Clear Event
Log word NO
is blinking.
