MultiVoice Gateway System Administration
Terminal-server commands
MultiVoice Gateway for the MAX— User’s Guide
Preliminary November 23, 1998
10-21
Show Revision
The Show Revision command displays the software load and version number currently
running in the MultiVoice Gateway. For example:
ascend% show revision
techpubs-lab-17 system revision: ebiom.m40 5.0A
Show Users
To display the number of active sessions, enter the Show Users command. For example:
ascend% show users
I Session
Line: Slot: Tx
Rx
Service
Host
User
O ID
Chan
Port
Data
Rate
Type[mpID] Address
Name
O 231849873
1:1
9:1
56K
56K
MPP[1]
10.10.68.2
jdoe
I 231849874
1:3
3:1
28800 33600 Termsrv
N/A
Modem 3:1
O 214933581
1:2
9:2
56K
56K
MPP[1]
10.10.4.9
arwp50
O 214933582
1:6
9:3
56K
56K
MPP[1]
MPP Bundle
arwp50
The output contains the following fields:
Field
Description
I/O
Incoming call (I) or Outgoing call (O).
Session ID
Unique session-ID. This is the same as Acct-Session-ID in RADIUS.
Line:Chan
Line and channel on which the session is established.
Slot:Port
Slot and port of the service being used by the session. Can indicate the
number of a slot containing a modem card and the modem on that card,
or the virtual slot of the MultiVoice Gateway unit’s bridge/router. If the
slot is virtual, the port number represents a virtual interface to the
bridge/router, starting with 1 for the first session of a multichannel
session.
Tx Data Rate
Transmit rate in bits per second.
Rx Data Rate
Receive rate in bits per second.
Service Type
Type of session, which can be Termsrv or a protocol name.
For MP and MPP, this field shows the bundle ID shared by the calls in a
multichannel session. The special values
Initial
and
Login
document the progress of a session.
Initial
identifies sessions that do
not yet have a protocol assigned.
Login
identifies Termsrv sessions
during the login process.
Host Address
Network address of the host originating the session.
For some sessions this field is N/A. For outgoing MPP sessions, only the
first connection has a valid network address associated with it. All other
connections in the bundle have the network address listed as MPP
Bundle.
