MultiVoice Gateway System Administration
Terminal-server commands
MultiVoice Gateway for the MAX— User’s Guide
Preliminary November 23, 1998
10-19
Show commands related to network information
The following Show commands are related to monitoring protocols and other network-specific
information:
Show ISDN
The Show ISDN command enables the MultiVoice Gateway to display the last 20 events that
have occurred on the specified ISDN line. Enter the command in this format:
show isdn
line-number
where
line-number
is the number of the ISDN line. (For discussion of how lines are
numbered, see Chapter 5, “Configuring the WAN Interfaces.”) For example, to display
information about the left-most built-in WAN port, specify line 0 (zero):
ascend% show isdn 0
The MultiVoice Gateway responds with one or more of the following messages:
PH: ACTIVATED
PH: DEACTIVATED
DL: TEI ASSIGNED (BRI interfaces only)
DL: TEI REMOVED (BRI interfaces only)
NL: CALL REQUEST
NL: CLEAR REQUEST
NL: ANSWER REQUEST
NL: CALL CONNECTED
NL: CALL FAILED/T303 EXPIRY
NL: CALL CLEARED/L1 CHANGE
NL: CALL REJECTED/OTHER DEST
NL: CALL REJECTED/BAD CALL REF
NL: CALL REJECTED/NO VOICE CALLS
Table 10-1.Network-specific Show commands
Show command
Where described
show arp
See Chapter 8, “Configuring IP Routing.”
show icmp
See Chapter 8, “Configuring IP Routing.”
show if
See Chapter 8, “Configuring IP Routing.”
show ip
See Chapter 8, “Configuring IP Routing.”
show udp
See Chapter 8, “Configuring IP Routing.”
show ospf
See Chapter 9, “Configuring OSPF Routing.”
show tcp
See Chapter 8, “Configuring IP Routing.”
show dnstab
See Chapter 8, “Configuring IP Routing.”
show fr
See Chapter 7, “Configuring Frame Relay.”
