6-16
Preliminary November 23, 1998
MultiVoice Gateway for the MAX— User’s Guide
Configuring MultiVoice
MultiVoice configuration examples
3
Set the Precedence parameter by pressing Enter to toggle through the list of hexadecimal
values which set the bit0 through bit2 of the ToS byte. For Example:
Ethernet
Mod Config
Precedence=100
The default is 101. You may toggle through and select values (Hexadecimal) representing
these processing priorities, as defined by RFC791:
4
Set the TOS parameter by pressing Enter to toggle through a list of processing cost options
for bit3 through bit6 of the ToS byte. For Example:
Ethernet
Mod Config
TOS=Minimize Delay
This parameter defaults to
Minimize Delay
. You may toggle through and select from
the following values (assigning the associated bit values to the ToS byte) for this
parameter, as defined by RFC1349:
Configuring Gateway call volumes
To configure the call volume for a MultiVoice Gateway:
1
Open the Ethernet > Mod Config > VOIP Options menu.
2
Set the Max VOIP calls parameter by pressing Enter to open the edit field, and entering a
value between 1 and the built-in maximum call volume for the MultiVoice Gateway. For
Example:
Ethernet
Mod Config
Max VOIP Calls=64
Parameter value
Processing priority
000
Routine
001
Priority
010
Immediate
011
Flash
100
Flash Override
101
CRITIC/ECP (default)
110
Internetwork Control
111
Network Control
Parameter value
Bit values
Minimize Delay
1000
Maximize Throughput
0100
Maximize Reliability
0010
Minimize Cost
0001
Normal (network control) 0000
