10-16
Preliminary November 23, 1998
MultiVoice Gateway for the MAX— User’s Guide
MultiVoice Gateway System Administration
Terminal-server commands
Set command
The Set command takes several arguments. The
?
argument lists them:
ascend% set ?
set ? Display help information
set all Display current settings
set term Sets the telnet/rlogin terminal type
set password Enable dynamic password serving
set fr Frame Relay datalink control
set circuit Frame Relay Circuit control
The Set All command displays current settings. For example:
ascend% set all
term = vt100
dynamic password serving = disabled
call failed
The MultiVoice Gateway did not answer the outgoing
call. This error can indicate a wrong phone number or
a busy phone number. Use the Show ISDN command
to determine the nature of the failure.
call terminated
N1
packets sent
N2
packets
received
This message indicates the number of packets sent
(
N1
) and received (
N2
).
cannot handshake
The MultiVoice Gateway answered the outgoing call,
but the two sides did not properly identify themselves.
This error can indicate that the call was routed to the
wrong MultiVoice Gateway module, or that the phone
number was incorrect.
frame-count must be in
the range 1-65535
The number of frames requested exceeded 65535.
no phone number
You did not specify a phone number on the command
line.
test aborted
The test was terminated (Ctrl-C).
unit busy
You attempted to start another self-test when one was
already in progress. You can run only a single self-test
at a time.
unknown items on command
line
The command-line contained unknown items.
Inserting one or more spaces in the telephone number
can generate this error.
unknown option
option
The command-line contained the option indicated by
option
, which is invalid.
unknown value
value
The command-line contained the value indicated by
value
, which is invalid.
wrong phone number
A device other than the MultiVoice Gateway answered
the call. Therefore, the phone number you specified
was incorrect.
Message
Explanation
