manualshive.com logo in svg

Asante IntraCore 36000 Series, User Manual

Share
Download
Asante IntraCore 36000 Series User Manual Download Page 95

 

 User’s 

Manual 

95 

CLI 

The following example displays LACP counters for port channel 1. 

Console#

show lacp 1 counters

 

Channel group : 1 ------------------------------------------------------------ 
Eth 1/ 1 --------------------------------------------------------------------- 
  LACPDUs Sent : 21   
  LACPDUs Received : 21   
  Marker Sent : 0   
  Marker Received : 0   
  LACPDUs Unknown Pkts : 0   
  LACPDUs Illegal Pkts : 0 
. 
. 
. 
Console# 

7.4.3 Displaying LACP Settings and Status for the Local Side 

You can display configuration settings and the operational state for the local side of an link aggregation.  

The following table describes the internal configuration information from the LACP display.  

Field Description 

Oper Key 

Current operational value of the key for the aggregation port. 

Admin Key  

Current administrative value of the key for the aggregation port. 

LACPDUs Internal 

Number of seconds before invalidating received LACPDU information. 

LACP System Priority 

LACP system priority assigned to this port channel. 

LACP Port Priority 

LACP port priority assigned to this interface within the channel group. 

Admin State, Oper 
State 

Administrative or operational values of the actor’s state parameters: 

Expired – The actor’s receive machine is in the expired state; 

Defaulted – The actor’s receive machine is using defaulted operational partner 
information, administratively configured for the partner. 

Distributing – If false, distribution of outgoing frames on this link is disabled; For 
example, distribution is currently disabled and is not expected to be enabled in 
the absence of administrative changes or changes in received protocol 
information. 

Collecting – Collection of incoming frames on this link is enabled; For example, 
collection is currently enabled and is not expected to be disabled in the absence 
of administrative changes or changes in received protocol information. 

Synchronization – The System considers this link to be IN_SYNC; For example, it 
has been allocated to the correct Link Aggregation Group, the group has been 
associated with a compatible Aggregator, and the identity of the Link Aggregation 
Group is consistent with the System ID and operational Key information 
transmitted. 

Summary of Contents for IntraCore 36000 Series


































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands