manualshive.com logo in svg

Asante IntraCore 36000 Series, User Manual

Share
Download
Asante IntraCore 36000 Series User Manual Download Page 195

 

 User’s 

Manual  195 

Syntax Description  

description 

string

 

no

 description 

String  

 Comment or a description to help you remember what is attached to this 
interface. (Range: 1-64 characters) 

Default  

None 

Command Mode  

Interface Configuration (Ethernet, Port Channel) 

Example  

The following example adds a description to port 24. 

Console(config)#

interface ethernet 1/24

 

Console(config-if)#

description RD-SW#3

 

Console(config-if)# 

16.26 dir 

This command displays a list of files in flash memory. 

Syntax Description  

dir [boot-rom | config | opcode [:

filename

]] 

The type of file or image to display includes: 

boot-rom 

Boot ROM (or diagnostic) image file. 

Config  

Switch configuration file. 

opcode  

Run- time operation code image file. 

filename  

Name of the file or image. The file is not displayed if the file exists and contains errors. 

Default  

None 

Command Mode  

Privileged Exec 

Summary of Contents for IntraCore 36000 Series


































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands