User’s
Manual 199
Default
Single-host
Command Mode
Interface Configuration
Example
The following example shows setting the system to allow a maximum of 10 hosts to connect to a port.
Console(config)#
interface eth 1/2
Console(config-if)#
dot1x operation-mode multi-host max-count 10
Console(config-if)#
16.32 dot1x port-control
This command sets the dot1x mode on a port interface. Use the no form to restore the default.
Syntax Description
dot1x port-control {auto | force-authorized | force-unauthorized}
no
dot1x port-control
auto
Requires a dot1x-aware connected client to be authorized by the RADIUS
server. Clients that are not dot1x-aware will be denied access.
force-authorized
Configures the port to grant access to all clients.
force-unauthorized
Configures the port to deny access to all clients.
Default
force-authorized
Command Mode
Interface Configuration
Example
Console(config)#
interface eth 1/2
Console(config-if)#
dot1x port-control auto
Console(config-if)#
16.33 dot1x re-authenticate
This command forces re-authentication on all ports or a specific interface.
