manualshive.com logo in svg

Asante IntraCore 36000 Series, User Manual

Share
Download
Asante IntraCore 36000 Series User Manual Download Page 288

288 

Asanté IntraCore 36000 Series 

Syntax Description 

show dot1x [statistics] [interface 

interface

] 

interface ethernet 

unit/port 

•

 

unit - This is device 1.  

•

 

port - Port number.  

Command Mode 

Privileged Exec 

Usage Guidelines 

This command displays the following information: 

Global 802.1X Parameters – Displays the global port access control parameters that can be configured for 
this switch as described in the preceding pages, including 

reauth-enabled

, 

reauth-period

, 

quiet-period

, 

tx-period

 and 

max-req

 commands. It also displays the following global parameters that are set to a fixed 

value, including the following items: 

supp-timeout Supplicant 

timeout. 

server-timeout Server 

timeout. 

reauth-max 

Maximum number of reauthentication attempts.  

802.1X Port Summary 

Displays the port access control parameters for each interface, including the 
following items: 

Status Administrative 

state for port access control. 

Operation Mode 

Dot1x port operation mode

 command. 

Mode 

Dot1x port control mode

 command. 

Authorized Authorization status (yes or n/a - not authorized).  

802.1X Port Details 

Displays detailed port access control settings for each interface as described in 
the preceding pages, including 

dot1x operation mode

, 

dot1x max count

, 

dot1x 

port-control

 and 

dot1x current Identifier

 commands. It also displays the 

following information: 

Status Authorization status (authorized or unauthorized). 

Supplicant 

MAC address of authorized client. 

Authenticator State Machine  

State 

Current state (including initialize, disconnected, connecting, authenticating, 
authenticated, aborting, held, force_authorized, force_unauthorized). 

Reauth Count 

Number of times connecting state is re-entered. 

Summary of Contents for IntraCore 36000 Series


































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands