manualshive.com logo in svg

Asante IntraCore 36000 Series, User Manual

Share
Download
Asante IntraCore 36000 Series User Manual Download Page 360

360 

Asanté IntraCore 36000 Series 

hybrid   

Specifies a hybrid VLAN interface. The port may transmit tagged or untagged 
frames. 

Default  

All ports are in hybrid mode with the PVID set to VLAN 1. 

Command Mode 

Interface Configuration (Ethernet, Port Channel) 

Example  

The following shows how to set the configuration mode to port 1, and then set the switchport mode to hybrid: 

Console(config)#

interface ethernet 1/1 

Console(config-if)#

switchport mode hybrid

 

Console(config-if)# 

Related Commands 

switchport acceptable-frame-types  

16.238 switchport native vlan 

This command configures the PVID (For example, default VLAN ID) for a port. Use the no form to restore 
the default. 

Syntax Description  

switchport native vlan 

vlan-id

 

no

 switchport native vlan 

vlan-id 

Default VLAN ID for a port. (Range: 1-4094, no leading zeroes) 

Default  

VLAN 1 

Command Mode  

Interface Configuration (Ethernet, Port Channel) 

Usage Guidelines  

If an interface is not a member of VLAN 1 and you assign its PVID to this VLAN, the interface will 
automatically be added to VLAN 1 as an untagged member. For all other VLANs, an interface must first be 
configured as an untagged member before you can assign its PVID to that group. 

If acceptable frame types is set to all or switchport mode is set to hybrid, the PVID will be inserted into all 
untagged frames entering the ingress port. 

Summary of Contents for IntraCore 36000 Series


































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands