manualshive.com logo in svg

Aruba 8325 Series, Installation And Getting Started Manual, Page: 64 / 65

Share
Download
Aruba 8325 Series Installation And Getting Started Manual Download Page 64

64

Aruba 8325 Switch Installation and Getting Started Guide

Accessing updates

•

To download product updates, go to either of the following:
◦

Hewlett Packard Enterprise Support Center's 

Subscription Service/Support Alerts

 page:

www.hpe.com/support/e-updates

◦

To view and update your entitlements, and to link your contracts, Care Packs, and warranties with your 
profile, go to the Hewlett Packard Enterprise Support Center 

More Information on Access to HP 

Support Materials 

page:

www.hpe.com/support/AccessToSupportMaterials

•

Software updates can be downloaded to the switch through several methods. Switch software updates are 
available at 

http://www.hpe.com/networking/software

.

•

For information on methods for downloading and installing software, see the appropriate manuals for your 
switch in the HPE Information Library at 

www.hpe.com/info/EIL

.

Websites

Hewlett Packard Enterprise Networking Information Library

www.hpe.com/networking/resourcefinder

Hewlett Packard Enterprise Networking Software

www.hpe.com/networking/software

Hewlett Packard Enterprise Networking website

www.hpe.com/info/networking

Hewlett Packard Enterprise My Networking website

www.hpe.com/networking/support

Hewlett Packard Enterprise My Networking Portal

www.hpe.com/networking/mynetworking

Hewlett Packard Enterprise Networking Warranty

www.hpe.com/networking/warranty

Hewlett Packard Enterprise Information Library

www.hpe.com/info/EIL

Customer self repair

Hewlett Packard Enterprise customer self repair (CSR) programs allow you to repair your product. If a CSR part 
needs to be replaced, it will be shipped directly to you so that you can install it at your convenience. Some parts do 
not qualify for CSR. Your Hewlett Packard Enterprise authorized service provider will determine whether a repair 
can be accomplished by CSR.

For more information about CSR, contact your local service provider or go to the CSR website:

www.hpe.com/support/selfrepair

IMPORTANT:

  Access to some updates might require product entitlement when accessed through 

the Hewlett Packard Enterprise Support Center. You must have a Hewlett Packard Enterprise 
Passport set up with relevant entitlements.

Summary of Contents for 8325 Series


































































Reviews:

No comments