Chapter 3 Installing the switch
37
Figure 21:
Mounting the switch in a four-post rack
4.
Adjust the rear-post bracket ears to fit the depth of the rack.
5.
Secure the rear-post brackets to the rack rear posts using four number 12-24 screws.
6.
Lock the position of the rear-post bracket ears using the included position-locking screws.
Figure 22:
Locking the position of rear-post brackets
7. Install transceivers
You can install or remove a transceiver from an SFP28/QSFP28 slot without having to power off the switch.
•
The transceivers operate only at full duplex. Half duplex operation is not supported.
•
Ensure the network cable is NOT connected when you install or remove a transceiver.
