background image

MAT-8000

4

When the Unit is in Use.

When the Unit is in Use.

Caution.

When Installing the Unit.

An all-pole mains switch with a contact separation of at least 3 mm in each pole shall be incorporated in 

the electrical installation of the building.

•  Never plug in nor remove the power supply plug with 

wet hands, as doing so may cause electric shock.

•  When unplugging the power supply cord, be sure to 

grasp the power supply plug; never pull on the cord 

itself. Operating the unit with a damaged power supply 

cord may cause a fire or electric shock.

•  When moving the unit, be sure to remove its power 

supply cord from the wall outlet. Moving the unit with 

the power cord connected to the outlet may cause 

damage to the power cord, resulting in fire or electric 

shock. When removing the power cord, be sure to hold 

its plug to pull.

•  Do not block the ventilation slots in the unit’s cover. 

Doing so may cause heat to build up inside the unit 

and result in fire.

•  Avoid installing the unit in humid or dusty locations, in 

locations exposed to the direct sunlight, near the heat-

ers, or in locations generating sooty smoke or steam 

as doing otherwise may result in fire or electric shock.

•  Should the following irregularity be found during use, 

immediately switch off the power, disconnect the 

power supply plug from the AC outlet and contact your 

nearest ArtSound dealer. Make no further attempt to 

operate the unit in this condition as this may cause fire 

or electric shock.

• If you detect smoke or a strange smell coming from 

the unit.

• If water or any metallic object gets int o the unit

• If the unit falls, or the unit case breaks

• If the power supply cord is damaged (exposure of 

the core, disconnection, etc. )

• If it is malfunctioning (no tone sounds.)

•  To prevent a fire or electric shock, never open nor 

remove the unit case as there are high voltage 

 components inside the unit. Refer all servicing to your 

nearest ArtSound dealer.

•  Do not place cups, bowls, or other containers of liquid 

or metallic objects on top of the unit. If they acciden-

tally spill into the unit, this may cause a fire or electric 

shock.

•  Do not insert nor drop metallic objects or flammable 

materials in the ventilation slots of the unit’s cover, as 

this may result in fire or electric shock.

•  Do not place heavy objects on the unit as this may 

cause it to fall or break which may result in personal 

injury and/or property damage. In addition, the object 

itself may fall off and cause injury and/or damage.

•  Make sure that the volume control is set to minimum 

position before power is switched on.

•  Loud noise produced at high volume when power is 

switched on can impair hearing.

•  Do not operate the unit for an extended period of time 

with the sound distorting. This is an indication of a 

malfunction, which in turn can cause heat to generate 

and result in a fire.

•  Contact your ArtSound dealer as to the cleaning. If 

dust is allowed to accumulate in the unit over a long 

period of time, a fire or damage to the unit may result.

•  If dust accumulates on the power supply plug or in the 

wall AC outlet, a fire may result. Clean it periodically. 

In addition, insert the plug in the wall outlet securely.

•  Switch off the power, and unplug the power supply 

plug from the AC outlet for safety purposes when 

cleaning or leaving the unit unused for 10 days or 

more. Doing otherwise may cause a fire or electric 

shock.

Summary of Contents for MAT-8000

















Reviews: