MAT-8000
14
8. Connection and setting.
power Supply
The remote paging console is powered by the Matrix through the RJ45 communication port when the communication
distance is < 50 meters. An extra DC 24V power input is equipped on the back part of the paging console to supply
power when the communication distance is longer than 50 meters.
Connection Between Remote paging Console & Extension keypad
The IDE communication cable is used to provide connection between the remote paging console and the extension
keypad as well as between two extension keypads.
Extension keypad Dip Switch Setting
There are 4 address codes on both remote the paging console and the extension keypad which are used to identify
these.
please Note:
Only one address code switch of each dip switch can be placed in the downward position. If any of the dip switches are
set at different addresses to those shown above, the console will not operate.
Extension keypad Remote paging Console Connection is made through the supplied 10P IDE cable. Once either two or
three extension panels are connected, the operation of paging announcements is the same as described previously for
individual zone paging or all call actions.
Extension Keypad 1
Extension Keypad 3
Extension Keypad 2
Connection trough
10P IDE cable
Remote paging console
Extension Keypad
Summary of Contents for MAT-8000
Page 15: ......
