8
MACHINE DESCRIPTION
The
Artos
CS 327
is a compact, electronic control linear feed wire processing machine that is designed
to process a wide variety of cables. The
CS 327
can accept flat or round material. A rugged machine
intended for long continuous operation, the
CS 327
uses a precise electronic measuring system and the
latest in wire processing technology to quickly and accurately process your material.
SPECIFICATIONS
A.
WIRE CUT LENGTHS
:
Maximum: 12598 inches (320M)
Minimum: .25” (6,4 mm)
B. WIRE SIZE:
(WIRE DEPENDENT)
The copper diameter this machine can cut is dependent on the stranding of the copper.
The cutterhead can produce 2000lbs of cutting force. Low strand counts mean that it
takes more force therefore the wire diameters are smaller as compared to a finely
stranded cable.
Two blade cutterhead
Machine with standard wire guide kit
Maximum OD 1.18” (30.0mm)
The maximum ID (inside diameter) of the guides is 1.25 inches (31.8mm)
Minimum: 12 AWG (3.3mm
2
), Wires that are more stiff like steel cable
can go to smaller sizes.
The minimum ID of the guides is 0.12 inches (3.05mm)
Machine with large wire guide kit
Maximum OD 1.43” (36.2mm)
The maximum ID of the guides is 1.50 inches (38.1mm)
Minimum: 12 AWG (3.3mm
2
) , Wires that are more stiff like steel cable
can go to smaller sizes.
The minimum ID of the guides is 0.12 inches (3.05mm)
Three blade cutterhead.
Maximum OD Up to 0.80 inches (20mm), Larger diameters may be possible
depending on depending on the wire.
Minimum: 12 AWG (3.3mm
2
) , Wires that are more stiff like steel cable can go to
smaller sizes.
C. STRIP LENGTHS
:
Two blade cutter head
Maximum: 39"(999 mm) Leading end 39”(999 mm).
Three blade cutter head
Maximum: 1.3"(33 mm) Leading end 1.3”(33 mm).
