46
CONFIGURATION
Configuration is used to configure the CS 327 with its options. As well as set-up associated position
ands timing values.
Click on the wrench symbol
to open the tabbed menu:
Programming
Machine
Options
The
General
tab
is information about the basic unit;
Blade type
selection for configuring the type of blade holder mounted on the machine.
o
Double
has separate pairs of cut off and stripping blades
o
Multi-blade
has 3 or more pairs of blades 1 pair of cut off and seprate stripping blades
for each end of the wire.
o
Pinch
is a blade design works like a standard side cutter. The main use for this type of
blade is to cut brake line housing.
Feed encoder installed
is not used. Checking or not checking this box will have no effect on
the machine
Wire feed using wheels
is not used. Checking or not checking this box will have no effect on
the machine
