Arthrex SynergyRF AR-9800, Service Manual

Page: 53 / 56

Preventative Maintenance Inspection Form
DFU-0276-4r0_fmt_en-US PM – 7/8
Appendix:
If a possible solution is displayed on the error message, please try to troubleshoot it before
proceeding with the PM guide. If Arthrex support is needed please call the Arthrex Support Line.
Message Possible Solution
Ablation Footswitch Stuck
A button on the foot switch is stuck. Disconnect the foot switch,
and try Replacing the foot switch
COAG Footswitch Stuck
A button on the foot switch is stuck. Disconnect the foot switch,
and try Replacing the foot switch
PROBE Already Used
The RF device attached to the console has either been
previously used, or has been disconnected and reconnected. Try
replacing the probe.
PROBE Communication Failure
Communication with the RF device has been lost. Try checking
the connection and replace the device, if necessary.
Replace Probe
The RF disposable device attached to the console is
malfunctioning. Try changing the probe.
System Temperature Failure The console temperature is outside of normal parameters.
Turn off and let cool down
The console has overheated. Try powering off the console for
10 minutes.
WRAP Footswitch Stuck
A button on the foot switch is stuck. Try replacing the foot
switch
Contact Technical Services Contact Arthrex Technical Services
Configuration File Corruption Contact Arthrex Technical Services
Critical Failure
A terminal fault has occurred, contact Arthrex technical
services.
LCD File Version Failure Touch panel failure. Contact Arthrex technical services.
LCD Communications Failure Touch panel failure. Contact Arthrex technical services.