Artesyn ATCA-7480, Installation And Use Manual, Page: 101 / 330

Maps and Registers
ATCA-7480 Installation and Use (6806800T17A)
101
5.1.1.1.3 LPC Firmware Decoding
The LPC interface never responds to LPC firmware accesses.
5.1.1.2 I2C Register Decoding
All I2C accesses from the IPMC towards the FPGA when the I2C master uses the I2C slave
address 0x7F (the corresponding 8bit slave address is 0xFE).
5.1.2 POST Code Register
The FPGA provides an 8 bit wide register to store POST codes to the LPC I/O address 0x80. The
two nibbles of the register are converted to 7 segment codes and are displayed as two hex
values by two 7 segment LED Displays.
The IPMC can read the POST code using the SPI interface (with the signal IPMC_SPI_SS_FPGA_
asserted) and the SPI address 0x7F.
The two 7 segment LED displays are also used for power failure indication.
Table 5-4 IPMC SPI Register
I2C Address Range Address Range Name Description
0x00 - 0x7F IPMC_REGISTERS All FPGA Registers which
are accessible from IPMC
Table 5-5 POST Code Register
LPC I/O Address: 0x80
IPMC I2C Address: 0x7f
Bit Description Default Access
7:0 POST codes from host 0 LPC: r/w
IPMC: r