Artesyn ATCA-7360, Installation And Use Manual

Page: 55 / 288

Installation
ATCA-7360 Installation and Use (6806800J07S)
55
2.5 Installing Blade Accessories
The following additional components are available for the blade:

DIMM memory modules

PMEM (persistent memory) module

SATA module

USB flash module

Rear transition modules
They are described in detail in the following sections. For order numbers refer to section
Ordering Information on page 40 .
SW3-3 Enable faceplate (Frontboard and RTM) reset push button
OFF: Reset push button enabled (default)
ON: Reset push button disabled
SW3-4 ICH10 TCO Timer system reboot feature
OFF: ICH10 TCO Timer system reboot feature enabled (default)
ON: ICH10 will disable the TCO Timer system reboot feature
SW4-1 ICH10 TOP Swap override
OFF: Default
ON: system is strapped to the “topblock swap” mode (Intel ICH10 inverts A16 for
all cycles targeting BIOS space).
SW4-2 ICH10 TCO Timer system reboot feature
OFF: ICH10 TCO Timer system reboot feature enabled (default)
ON: system is strapped to the “No Reboot” mode (ICH10 will disable the TCO Timer
system reboot feature).
SW4-3 and
SW4-4 Load BIOS default settings
OFF, OFF: Normal operation
OFF, ON: Load BIOS default from IPMI Boot Parameter DEFAULT area
ON, OFF: Reserved
ON, ON: Status Codes to COM
Table 2-4 Switch Settings (continued)
Switch Description