Artesyn ATCA-7360, Installation And Use Manual

Page: 19 / 288

ATCA-7360 Installation and Use (6806800J07S)
19
About this Manual
Overview of Contents
This Reference Guide is intended for users qualified in electronics or electrical engineering.
Users must have a working understanding of Peripheral Component Interconnect (PCI),
AdvancedTCA®, and telecommunications.
The manual contains the following chapters and appendices:

About this Manual on page 19 lists all conventions and abbreviations used in this manual
and outlines the revision history.

Safety Notes on page 27 lists safety notes applicable to the blade.

Sicherheitshinweise on page 31 provides the German translation of the safety notes section.

Introduction on page 37 describes the main features of the blade.

Installation on page 45 outlines the installation requirements, hardware accessories,
switch settings, installation and removal procedures.

Controls, Indicators, and Connectors on page 67 describes external interfaces of the blade.
This includes connectors and LEDs.

BIOS on page 87 describes the features and setup of BIOS.

Functional Description on page 141 describes in more detail functional blocks of the blade.
This includes a block diagram, description of the main components used and so on.

Maps and Registers on page 151 provides information on the blade’s maps and registers.

Serial Over LAN on page 211 provides information on how to establish a serial-over LAN
session on your blade.

Supported IPMI Commands on page 217 lists all supported IPMI commands.

FRU Information and Sensor Data Records on page 259 provides information on the blade’s
FRU info and sensor data.

Firmware Upgrade on page 275 provides information on how to upgrade the firmware
components.

Replacing the Battery on page 281 provides the battery exchange procedures.

Related Documentation on page 285 provides links to further blade-related
documentation.