manualshive.com logo in svg

Artesyn Embedded Technology ATCA-7370, Installation And Use Manual

Share
Download
Artesyn Embedded Technology ATCA-7370 Installation And Use Manual Download Page 249

Appendix B

ATCA-7370/ATCA-7370-S Installation and Use (6806800P54G)

249

B

Related Documentation

B.1

Artesyn Embedded Technologies - Embedded 

Computing Documentation

The publications listed below are referenced in this manual. You can obtain electronic copies of 
Artesyn Embedded Technologies - Embedded Computing publications by contacting your 
local Artesyn sales office. For released products, you can also visit our Web site for the latest 
copies of our product documentation.

1. Go to 

www.artesyn.com/computing/support/product/technical-documentation.php

.

2. Under FILTER OPTIONS, click the Document types drop-down list box to select the type of 

document you are looking for.

3. In the Search text box, type the product name and click GO.

B.2

Related Specifications

For additional information, refer to the following table for related specifications. As an 
additional help, a source for the listed document is provided. Please note that, while these 
sources have been verified, the information is subject to change without notice.

Table B-1 Artesyn Embedded Technologies - Embedded Computing Publications 

Document Title

Publication Number

ATCA-7370/ATCA-7370-S Quick Start Guide

6806800P66

ATCA-7370/ATCA-7370-S Safety Notes Summary

6806800P67

Table B-2 Related Specifications 

Organization

Document Title

PCI-SIG

PCI Local Bus Specification Revision 2.2
PCI-X Addendum to the PCI Local Bus Specification 1.0

PICMG

PICMG 3.0 Revision 2.0 Advanced TCA Base Specification
PICMG 3.1 Revision 1.0 Specification
Ethernet/Fiber Channel for AdvancedTCA Systems

Summary of Contents for ATCA-7370





























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands