Artel NCA115-2A, Manual

Page: 14 / 39

14 of 36
EN
It is recommended that emissions are checked after installation.
To obtain the test report results, load the performance parameters in the possession of the
manufacturer and the technician, who can only use them after checking that the installation
is able to reproduce the laboratory conditions. These performances are only achievable after
15/20 hours of operation at rated power.
PARAMETER
UNIT OF
MEASURE
NCA115-2A NCA150
Heat input kW 13,1 14,9
Nominal heat output
kW 11,6 13,1
Reduced heat output
kW 5,6 5,6
CO concentration at nominal
reference (13% O
2
)
mg/m
3
130 120
CO concentration at reduced
reference (13% O
2
)
mg/m
3
229 229
Nominal efficiency
% 88,8 88,3
Reduced efficiency
% 90 90
Average consumption Kg/h 1,24 - 2,63 1,24 - 2,99
Heatable surface mc 260 300
Flue gas flow rate (min-max)
g/s 5,72 - 9,69 5,72 - 10,45
Draft advised (min-max) Pa 3 - 5 3 - 8
Flue gas temperature (min-max) °C 123 - 164 123 - 178
Tank capacity
Kg 18 18
Diameter smoke outlet tube
mm 80 80
Diameter air intake mm 50 50
Nominal voltage V 230 230
Nominal frequency
Hz 50 50
Ignition power consumption W 290 290
Electrical consumption (max-min) W 100 - 35 105 - 35
Pellet insert weight Kg 108 120
Powders at 13% O2 Ref.
nominal heat output
mg/m 3 20 20
Energy Class A +
IEE 125 124
Environmental Certificate
Decree n° 186 del 7/11/2017
N° Test Report K 3097 2021 T1