Artel NCA115-2A Manual Download Page 1

Page: 1 / 39

1 of 36

Pellet insert

Cod. 001247

We thank you for having chosen one of our products, the fruit of technological experience and of
continual research for a superior quality product in terms of safety, dependability, and service.
In this manual you will find all the information and useful suggestions to use your product with the
maximum safety and efficiency.

• Incorrect installation, incorrectly performed maintenance, improper use of the product release the

manufacturer from every eventual damage derived from the use of the pellet insert.

• The unit cannot be used as an incinerator. Do not use fuels other than pellets.
• This manual has been realized by the manufacturer and constitutes an integral part of the product

and must remain with it during its entire lifetime. If the product is sold or transferred, be sure that
the booklet is present since the information contained in it are addressed to the buyer, and to all
those persons of various titles who complete the installation, use and maintenance.

• Carefully read the instructions and the technical information contained in this manual, before

proceeding with the installation, use, and any operation on the product.

• The observance of the indications contained in the present manual guarantees the safety of people

and the product, the economy of use and a longer functioning lifetime.

• Although the carefully studied design and the risk analysis done by our company has permitted

the realization of a safe product, in any case, before effecting any operation on the pellet insert,
it is recommended to keep said manual available and pay scrupulous attention to the instructions
written therein.

•  Be very careful when moving the ceramic details where present.
•  Check the precise flatness of the pavement where the product will be installed
•  The wall where the product will be placed must not be constructed in wood, or in any case, made

of an inflammable material, and in addition it is necessary to maintain a safety distance.

• While the pellet insert is in operation, several parts of the pellet insert (door, handle, sides) can

reach high temperatures. Therefore pay attention and use the proper precautions, above all in the
presence of children, elderly or disabled persons, and animals.

• Assembly must be performed by authorized persons (Authorized Assistance Center).
• Diagrams and drawings are furnished for the purpose of illustration; the manufacturer, with the

intent of pursuing a policy of constant development and renewal of the product can, without any
notice, make any modifications that are believed opportune.

• When the pellet insert is working at its maximum speed, it is strongly suggested to wear gloves while

handling with the door for pellets loading and the door handle.

• It is prohibited to install in bedrooms or in explosive environments.
• Only use replacement parts recommended by the supplier.

In the event of a fire, disconnect the power supply, use an extinguisher and call the fire fighters if

necessary. After that contact the Authorized Assistance Center.

Never cover the body of the pellet insert in any way or obstruct the openings

placed on the upper side when the device is operating. All our pellet inserts are

trial lighted on the construction line.

This instruction booklet is an integral part of the product: make sure that it always accompanies the
appliance, even in case of transfer to another owner or in the case of transfer to another place. In the
event of damage or loss, request a copy from the area technician.

These symbols indicate specific messages in this booklet:

We highly recommend to turn to our Authorized Service Centre for the installation

and the first ignition of the device as it not only carries out the installation

perfectly but also verifies the regular operation of it.

Dear Customer,