Chapter 3
:
Installing the Network Extender
STANDARD PN 365-095-28246 x.1
SURFboard SBX-AC1200P Network Extender User Guide
Copyright ARRIS Enterprises, LLC, 2016. All Rights Reserved.
15
Connectors and Controls
The Network Extender has the following connectors and controls:
1.
Ethernet: Used to connect the Network Extender with a client device such as a computer,
printer, gaming console, router, and so on.
2.
G.hn Secure Pairing button: Initiates secure pairing.
Note: If you hold the Pairing button for more than 15 seconds, the Network Extender
resets its pairing defaults (that is, it loses its connection to any securely paired devices).
3.
Reset button: Can be used either to reset the Network Extender to its factory settings or
to restart the Network Extender. Use a pointed non-metallic object to press and hold this
button.
•
Press and hold this button for three to five seconds to restart the Network Extender
as if you power cycled the device.
•
Press and hold this button for more than 10 seconds if you want to reset the Network
Extender to its factory default settings and restart the device. Any customized settings
that you have set will be lost.
Configuring and Installing the Network Extender
In order to use Gigabit home networking (G.hn), you must have at least two G.hn devices
connected to your power grid. The devices will begin to communicate with each other as soon
as they detect each other over the power grid. You can add additional devices later to expand
your network.
You can use the RipCurrent network by just plugging in two or more G.hn-enabled devices into
the electrical outlets in your home.
However, this network will not be secure. We recommend
pairing the devices to add security to the RipCurrent network.
