有
第
16
页 共
18
页
喷洒安装
Spray installation
1、将加长杆喷头软垫卸下，套入圆形垫片。将电机座垫片垫在电机座下方，拧紧两颗 M3*12 螺丝
1. Remove the soft pad of the extension rod nozzle, and insert it into a circular gasket. Place the
motor base gasket under the motor base and tighten the two M3 * 12 screws
1、使用 8mm 水管连接加长杆喷头，另一端连接一体无刷水泵出水口；
1. Use an 8mm water pipe to connect the extension nozzle, and connect the other end to the
integrated brushless pump outlet;
2、使用配件包中的 Y 型信号线，将四个一体水泵信号线并联为两个水泵信号线，并连接飞控水泵控制
通道；注意一体水泵电源出厂时已连接，无需改动
2. Use the Y-type signal cable in the accessory package to connect the four integrated pump signal cables in
parallel to two pump signal cables and connect the flight control pump control channel; note that the
integrated pump power supply is connected at the factory and does not need to be modified
