翼飞特农业植保机机架安装说明书
第
9
页 共
18
页
机臂安装 Arm installation
机臂安装需要拆开机身部分零件，请务必注意这些零件原先的安装位置
Some parts of the frame need to be disassembled for the arm installation. Please pay attention to the original
installation position of these parts.
1、将机身上碳板鲨鱼鳍拆除，留意原鲨鱼鳍安装位置
1. Remove the carbon plate shark fin on the frame, pay
attention to the original shark fin installation position
2、将机身前后两端头罩左右两侧螺丝拆除
2.Remove the left and right screws on
the front and rear ends of the frame.
2、机身上碳板除图示螺丝无需拆除，其他螺丝全部拆除，把上碳板移走；
3. The carbon plate on the frame does not need to be removed except for the screws shown
in the figure. All other screws are removed and the upper carbon plate is removed;
4、拧松机身中部前后两侧 U 型板 M3*8 螺丝，拆下 U 型侧板
4. Loosen the U-shaped plate M3 * 8 screws on the front and back sides of the
middle of the frame, and remove the U-shaped side plate
