ARRI WCU-4 User Manual Download Page 54

Page: 54 / 79

Menu

Snap Function
Use the

SNAP

soft button to correct a slight offset for a single data

point. The snap function will move the nearest available data point

on the WCU-4 screen to the currently set lens position:

1 Drive the lens scale to a witness mark.
2 Press the

SNAP

soft button. The nearest available data

point on the WCU-4 screen will jump to the currently set

position.

Press the

RESET

soft button to reset all editing actions.

Press the

BACK

soft button to apply all editing actions and return to

the Select Axis screen.
Press the

SAVE

soft button to save the lens file to SD card folder /

ARRI/ALEXA/LDA. You can edit the lens name before saving.

Uploading a Lens File

Uploading a lens file wirelessly to the motor controller is not yet

supported. This feature will be available with a future software

update package.

11.5.2

Circle of confusion

Select the circle of confusion (COC) for correct depth of field

calculation.
Use the

and

DOWN

soft buttons or the zoom stick to scroll

through the COC list. Press the

SET

soft button to select a circle of

confusion.

Summary of Contents for WCU-4
















































































Search results

Summary of Contents for WCU-4

Reviews:

Related manuals for WCU-4

Brands by name

Popular brands

ARRI WCU-4, User Manual

Search results

Summary of Contents for WCU-4

Reviews:

Related manuals for WCU-4

Brands by name

Popular brands