ARRI TRINITY User Manual Download Page 4

Page: 4 / 40

1. For your safety

Before use, please ensure that all users comprehensively read, understand,
and follow the instructions in this document.

1.1.Risk levels and alert symbols

Safety warnings, safety alert symbols, and signal words in these instructions indicate different
risk levels:

CAUTION:

The TRINITY system should only be used by experienced

and trained operators.

This product is not designed for inexperienced beginners and shall not be used at all
without proper training.

Danger

indicates an imminent hazardous situation which, if not avoided,

will result in

death or serious injury.

WARNING

indicates a potentially hazardous situation which, if not

avoided,

may result in

death or serious injury.

CAUTION

indicates a potentially hazardous situation which, if not

avoided,

may result in

minor or moderate injury.

NOTICE

NOTICE

explains practices not related to physical injury. No safety alert

symbol appears with this signal word.

NOTE

Provides additional information to clarify or simplify a procedure.

DANGER

Warning

CAUTION

Summary of Contents for TRINITY









































Search results

Summary of Contents for TRINITY

Reviews:

Related manuals for TRINITY

Brands by name

Popular brands

ARRI TRINITY, User Manual

Search results

Summary of Contents for TRINITY

Reviews:

Related manuals for TRINITY

Brands by name

Popular brands