!
4.1 Gimbal Extension
The TRINITY and the Joystick / Monitor
Mount require more clearance than a
standard Gimbal.
Every TRINITY System for artemis rigs is
supplied with an extension for the Gimbal
Handle. The Gimbal extension should be
added between the curved part and the
straight part of the Gimbal handle.
CAUTION:
Thread locker was used while the assembly
of the Gimbal.
To unscrew the curved part of from the
straight part of the handle, a heat gun should
be used to warm up and to release the thread
locker.
Please use a medium strong thread locker
when you mount the extension.
CAUTION:
Make sure that the threaded axle is not to
deep inside the section which contains the
bearing for Yoke axes.
If the axle is forced into too deep a position,
the axle will block the Yoke axes.
4.2 The TRINITY Battery Hanger
The top the TRINITY Battery Hanger is shaped like a camera dovetail plate.
The shape is the same as the regular artemis camera dovetail plate.
Therefore the TRINITY Battery Hanger can be mounted to the artemis Top Stage
and the Pro Top Stage.
The rods at the bottom will take
the TRINITY Battery Mounts and
existing artemis C-Bat mounts
with a LEMO 1B 2pin plug.
The rod section at the back of
the TRINITY Battery Hanger is
pivoting which will support a
perfect Dynamic Balance.
13
