!
7.
Open the clamping mechanism of the Top
Stage
and mount the Battery Hanger.
8.
Slide the Pendulum assembly onto the rods of
the Battery Hanger and center it under the post
and clamp tight.
NOTICE
The Clamp Lever of the Pendulum has to be
aligned to the front.
9.
Slide the 3 Battery Mounts onto the rods of the
Battery Hanger. Two in the front and one in the
back as shown.
10.
You can use the extra rod to mount the two batteries onto the
rods in the front V shaped as shown.
NOTICE
The clamp lever of the right battery mount has to be close to
the knurled fore and aft adjustment knob without touching the
knob.
11.
Connect the batteries to the
Battery In
Power sockets at both sides of the
Battery Hanger.
12.
Connect the
Pwr Out
of the Battery Hanger to the
Cam
Pwr Out
of your Top Stage at the bottom of the Trinity
NOTICE
There are different Power cables in the package.
Always ensure you are using the correct plug fitting to the
correct Camera Power Out sockets on the Top Stage.
18
