!
7.1 Mounting the Camera
CAUTION
Ensure that Cam Pwr and STAB Pwr are switched OFF.
The TRINITY comes with a Quick Lock mounting
mechanism. It offers one clamp mechanism for the
Camera Dovetail Plate located at the right back of the
mount and a side to side adjustment located at the front of
the mount.
NOTICE
Make sure that the side to side adjustment is in a
center position before you start with the balancing
procedure.
NOTICE
A perfectly symmetric camera will NOT need any side
to side adjustment.
Open the clamp of the Quick Lock mounting
mechanism and slide the camera inside the ring.
NOTICE
It may be necessary to detach
some accessories to mount the
camera inside the TRINITY head
ring. These can be reattached after
the camera is mounted.
NOTICE
Make sure that the camera is
always level front to back with the
COG fully neutral when the camera
is horizontally adjusting fore and
aft.
NOTICE
When adding or removing
components from the camera
adjust the fore and aft to bring the
camera into a neutral and
horizontal position.
CAUTION
Under no circumstances push
fingers or other limbs between the
TRINITY Yoke and the inner ring, as
injuries can result.
24
