ARRI IVS Instruction Manual Download Page 87

Page: 87 / 112

SUB MENU

DISPLAY
VERT.
POS. 3
> WHITE
LEVEL 2

ALL
STANDARD
EXIT

INVERSE OFF

SUB MENU

DISPLAY
VERT.
POS. 3
WHITE
LEVEL 2

ALL
STANDARD
EXIT

> INVERSE OFF

6.9.2 White Level

This line is used to change the brightness of all man-readable
windows except the frame lines. Value

means dark

gray, value

corresponds to bright white characters.

• Move the cursor

with the keys

and

to the line

WHITE

. By pressing the key

the values for the

brightness of the characters will increment beginning
from

, and after that back to

The key

will decrement in the opposite direction.

6.9.3 Inverse

This menu changes the appearance of all man-readable
windows except the format markings. If inverse

OFF

selected, the characters will appear white. If the background
is

BOXED

it will appear black. If inverse

is selected,

the characters will appear black. If the background is

BOXED

it will appear white.

• Move the cursor

with the keys

and

to the line

INVERSE

. The keys

will switch between

and

OFF

Summary of Contents for IVS

















































































































Search results

Summary of Contents for IVS

Reviews:

Related manuals for IVS

Brands by name

Popular brands

ARRI IVS, Instruction Manual

Search results

Summary of Contents for IVS

Reviews:

Related manuals for IVS

Brands by name

Popular brands