ARRI IVS Instruction Manual Download Page 35

Page: 35 / 112

5 Standard Video Controls

The IVS can be used like a standard video assist if no
inserter functions are used.

Note:

For exchanging the optic between academy
and silent format, refer to chapter ”Changing
the Optic”, 4.2.5.

Note:

All currently used settings are stored even if the
IVS or the camera is switched off. After restarting
the IVS the settings are unchanged.

5.1 Off/ On and Locking

the Keyboard

The IVS can be switched on and off independently from the
film camera. As long as the film camera is switched off,
the IVS is also off.

on/off

lock

• The O

position switches the IVS off without affecting

the film camera. O

activates the IVS, and L

OCK

dis-

ables the keyboard to prevent unintentional handling

Standard Video Controls

Summary of Contents for IVS

















































































































Search results

Summary of Contents for IVS

Reviews:

Related manuals for IVS

Brands by name

Popular brands

ARRI IVS, Instruction Manual

Search results

Summary of Contents for IVS

Reviews:

Related manuals for IVS

Brands by name

Popular brands