1 - General >> Working with Arma-Chek D
APPLICATION MANUAL
D
© ARMACELL UK LTD.
General >> Working with Arma-Chek D
CORRECT USE OF ARMA-CHEK D TAPES
The following procedures are applicable for Arma-Chek
self-adhesive matching tape with 20 mm, 50 mm and
100 mm width.
• Self-adhesive tapes are to be used for internal
applications only -
do not use them on external
installations!!
• Check that the seams and joints are clean, dry and
free from contamination before applying the self
adhesive tape. To clean the seams and joints use the
Armafl ex cleaner.
• Peel back release paper and cover the entire seam
line with an additional 50 mm overlap where appli-
cable, applying pressure during the installation.
• Check the self-adhesive tape has completely
adhered itself to the under-laying covering.
• Self-adhesive Arma-Chek tape should not be used as
the
only
fi xing type for butt and longitudinal joints and
seams.
Temperature limits using self-adhesive tapes:
• Ambient application tempe10 °C to +35 °C,
maximum relative humidity 80 %
• Surface application temperature: minimum -50 °C,
m80 °C
• Always store in a warm, dry storage location. Ideal
storage temperature +5 °C to +35 °C (preferred
+18 °C)
D (3)
