Arkray SE-1520, Operating Manual

Page: 84 / 91

5-06 ■ SE-1520
Description and troubles Problems and causes Remedy
Abnormal PMC
Internal cables are disconnected.
●
●
Turn on the power again.
If the same trouble occurs,
contact your distributor.
●
●
T20
Ｔ２０ ＰＭＣ ｔｒｏｕｂｌｅ
ＯＫ（ＥＮＴＥＲ）
A b n o r m a l a n a l o g u e c i r c u i t o f
measurement system.
Abnormal reference voltage.
Abnormal off setting of measurement circuit.
AD converter is broken.
●
●
●
●
Turn on the power again.
If the same trouble occurs,
contact your distributor.
●
●
T25
Ｔ２５ Ａｍｐ ｔｒｏｕｂｌｅ
ＯＫ（ＥＮＴＥＲ）
The plate bar code cannot be
judged by A/D count value.
Abnormal barcode sensor
The plate is dirty.
●
●
●
Clean the table.
●
T35
Ｔ３５ Ｂａｒｃｏｄｅ ｓｅｎｓｏｒ
ＯＫ（ＥＮＴＥＲ）
Abnormal product information
storage memory
The power was turned off during
writing to or deleting from memory.
Defective memory board
●
●
●
If the same trouble occurs,
contact your distributor.
●
T40
Ｔ４０ Ｍｅｍｏｒｙ：ｐｒｏｄｕｃｔ
ＯＫ（ＥＮＴＥＲ）
Abnormal product information
mechanism memory
The power was turned off during
writing to or deleting from memory.
Defective memory board
●
●
●
If the same trouble occurs,
contact your distributor.
●
T41
Ｔ４１ Ｍｅｍｏｒｙ：ｍｅｃｈａｎｉｓｍ
ＯＫ（ＥＮＴＥＲ）
Abnormal memory storing user
setting values (e.g. option setting)
The power was turned off during
writing to or deleting from memory.
Defective memory board
●
●
●
If the same trouble occurs, contact
your distributor.
Set (enter) the user setting values again
because the values are initialized or
returned to the former setting values.
●
●
T42
Ｔ４２ Ｍｅｍｏｒｙ：ｓｅｔｕｐ
ＯＫ（ＥＮＴＥＲ）
Abnormal measurement
information storage memory (e.g.
magnetic card information)
The power was turned off during
writing to or deleting from memory.
Defective memory board
●
●
●
If the same trouble occurs,
contact your distributor.
●
T43
Ｔ４３ Ｍｅｍｏｒｙ：ｐａｒａｍｅｔｅｒ
ＯＫ（ＥＮＴＥＲ）
5-2
トラブルメッセージ
Chapter 5 Troubleshooting
4-2-1 試験片テーブルの清掃