Arkray SE-1520, Operating Manual

Page: 43 / 91

Press the Start button 4.
1
0
4
7 8 9
5 6
2 3
Press [START] or [1] key.
Go through the checks before
measurement
(see 2-3-3 Checks before
Measurement ).
●
●
2-3-5 検体の分注操作
2-2
測定時の注意
Chapter 2 Measurement
SE-1520 ■ 2-19
Set measurement No. or ID (when necessary) 5.
Press [1] key on the Ready
Screen.
M e a s u r e m e n t N o . E n t e r i n g
Screen appears.
●
Enter the measurement No.
U p t o 4 - d i g i t n u m b e r i s
available to set.
Press [ENTER].
●
●
The sequent number from
the previous measurement
No. is shown as the initial
value.
Press [ENTER] when you
s t a r t t h e m e a s u r e m e n t
with this value.
If the power is turned off,
the initial value returns to
1.
▲
S t a n d b y ■ 2 0 0 0 - 0 6 - 1 0
I D（ 1 ） I N F O（ 2 ）
Ｎo . ■■■ ＜＿ ＞
O K（ E N T E R ）
The entered measurement No.
is stored and the ID Entering
Screen is displayed.
Enter ID. ID can be entered
using alphanumeric keys and
hyphens (up to 13 digits).
●
●
The previously entered ID
is displayed as the initial
v a l u e . I f y o u w a n t t o
c o n t i n u e m e a s u r e m e n t
with the sequent ID, press
[ENTER].
However, once you go back
t o t h e M a i n M e n u , t h e
previous ID is deleted.
▲
I D＜ ■■■■ ＞
O K（ E N T E R ）
Use numeric keys and [-/.]
keys to enter IDs.
The following 12 symbols
can be entered with [0]
key.
＊？＃.．：； ー＋／％
▲
Press [-/.] key to move the
cursor.
Press [-/.] key while pressing
［MENU］ key to delete the
last character.
Press [START] key to return
to the first displayed ID.
▲
When a barcode reader is used,
the barcode is read.
●
When the optional barcode
reader is in use, ID entry
with key is not necessary.
T h e r e a d b a r c o d e s a r e
allocated as IDs of sample.
▲