MAGB2 User Guide
47
V1.7 2021-10-01
16. Liner and electrode selection
Liner and electrode material selection are an important issue when choosing your flowmeter. The tables
below serve to give you an idea of general material compatibility. If you are not sure about suitability of
liner/electrode material for a particular medium, please contact the Arkon sales department for further
assistance, and the site where the flowmeter is to be used for what materials are acceptable for the process
media. Arkon can only recommend materials, we cannot guarantee them.
Please note that Arkon offer also WRAS approved material
for all standard sizes. For more info contact our
sales department.
Liner Selection:
Hard Rubber
Drinking water and wastewater
0 -
70°C
Soft Rubber
Water with abrasive particles
0 -
70°C
PTFE
Chemicals and food industries
0 -
130°C
Hygienic Rubber
Drinking water, WRAS approved
cold water
Electrode selection:
Hastelloy
General purpose, sewage, water,
seawater, chemicals
Titanium
Aggressive chemicals
Platinum
Aggressive chemicals