MAGB2 User Guide
11
V1.7 2021-10-01
Date
Show actual date set in the meter.
Frequency output (FOUT)
Show actual frequency on the output.
External temperature reading (XTemp)
Show actual temperature using external temperature sensor.
External pressure reading (XPress)
Show actual pressure using external prsesure sensor.
Velocity
Shows calculated velocity from actual flow and set DN
Symbol
Battery capacity
100 % - 80 %
80 % - 60 %
60 % - 40 %
40 % - 20 %
< 20%
If the battery capacity display is between 20% - 40%, we recommend that the existing
batteries are replaced with new batteries.
Symbol
Function
Enter
Escape
Back
Down
Up
Left
Right
D
Flow simulation mode
Selection menu
Measurement Stop
: If the display indicates this symbol, the totalizers are
not incremental.
Measurement Running
: Flow meter run, totalizers are incremental
Fast Excitation function:
This icon indicates a maximum frequency of
excitation (6.25 Hz). This option is available if you turn on this function in user
menu and push the button for more than 5 second.
The following 5 minutes
will be at Fast Excitation and will then revert back to the previous setting.
This setting is battery consumable!
RS485 module connected