Side rail height extensions
These instructions show the installation of side rail height extensions
CM-ACC02-1.52 and CM-ACC02-3.52 for full length standard height
wooden side rails (CM-ACC00-1.52, CM-ACC00-3.52, and CM-
ACC01-1.52).
Side rail height extensions should be used with the recommended
thickness of mattress (see page 12).
Clamp-on extensions can be
added to the full-length side rails to increase their height by
5.5in.(14cm) and allow use of a mattress overlay of a thickness from
4.3in.(11cm) to 4.5in.(11.5cm).
CM-ACC02-1.52 and CM-ACC02-3.52
are for use with full length standard
height wooden side rails CM-ACC00-1.52, CM-ACC00-3.52 or CM-ACC01-1.52.
The side rail height extensions are supplied as identical pairs. They can be used
on either side of the bed.
WARNING
Only use side rail height extensions with the side rails for which
they are designed.
Always use the correct M8 size hex wrench (Allen key) supplied
when fitting the socket head screws. Using other tools may
result in the screws not being fully tightened.
Before use, make sure that the accessory is tightly fitted to the
side rail and does not move forward.
CM-ACC02.52
746-574-AM-1
29
