Secure the side rail fixing bracket to the
underside of each end panel, using two M8
x 16mm socket head screws (B). Make
sure both these screws are fully tightened.
Fully tighten the two top fixing screws (A).
Repeat this procedure to attach the other
side rail on the opposite side of the bed.
Operation
To lower the side rail:
Hold the plastic molding (C) at the foot end
of the bed and lift the rail slightly.
Press and hold the release button (D) on
the side rail end pillar.
Lower the side rail to its bottom position.
Repeat this procedure at the head end of
the bed.
To raise the side rail:
Hold the plastic moulding (C) at the foot
end of the bed and pull the top rail
upwards until the side rail locks
automatically in the raised position.
Repeat this procedure at the head end of
the bed.
WARNING
Always hold the plastic moulding at one end of the top rail when raising or
lowering the side rail. Do not allow the side rail to drop as this may
damage the side rail.
Accessory weights – full-length side rails (per side)
CM-ACC00.14
24lb.(11.0kg)
CM-ACC00.52
22lb.(10.0kg)
CM-ACC04.52
26lb.(12.0kg)
B
C
D
C
746-574-AM-1
28
