7
Pull off the plastic cap (K) from the socket on the head end actuator (L).
Plug the curly cable (M) into the actuator socket.
Replace the cap, making sure it “clicks” into place; this will prevent the
connector being accidentally pulled out of the actuator.
Connect the foot end actuator cable in the same way.
8
The control box is located below
the seat section on the patient’s
right hand side.
Push a flat bladed screwdriver
into the slot (N) to release the
clip holding the cover, while
pulling down the tab (P).
Slide the cover off the control
box and keep it safe.
L
M
K
N
P
746-574-AM-1
17
