Full-length side rails
WARNING
Always use the 4mm and 5mm Allen (hexagon) keys supplied when
securing the socket head screws. Using other tools may result in the
screws not being fully tightened.
These instructions show the fitting of wooden extra height side rails
model CM-ACC00-1.14. The other models of full-length side rails are
attached and used in the same way. Extra height side rails should be
used when the mattress thickness is between 5.9in.(15cm) and
6.8in.(17.2cm). Refer to page 12.
Full-length side rails are supplied as identical pairs. They can be attached to
either side of the bed.
Installation
Position the side rail on the bed.
Line up the fixing holes on the edges of the
bed end panels with the top fixing holes in
the side rail end pillars.
Attach the side rail to the end panels with
the two M6 x 80mm socket head screws
(A), but do not tighten them fully at this
stage.
A
746-574-AM-1
27
