Arjohuntleigh Maxi 500, Maintenance And Repair Manual

Page: 43 / 53

43
001
-005
53
-E
N
r
e
v. 5
Service Procedure 22 - Safe
Working Load Test (Local Requirement)
1) Two-point spreader bar (with or without
scale)
• Set up the ArjoHuntleigh Load Test
Kit as shown and test to the safe
working load (SWL).
• Release the load and remove the
load test equipment. Check the hoist
for any permanent deformation or
damage.
2) DPS (with or without scale)
• Set up the ArjoHuntleigh Load Test
Kit as shown and test to safe working
load (SWL).
• Release the load and remove the
load test equipment. Check the hoist
for any permanent deformation or
damage.
Fig. 39
WARNING: OBEY ALL RELEVANT SAFETY PRECAUTIONS.
Two-Point Spreader Bar
(With or Without Scale)
DPS (With or
Without Scale)
Tool No. Description Qty Tool No. Description Qty
ST164 Hand Control and load cell 1 ST164 Hand Control and load cell 1
ST165 Load test strap-short 2 ST165 Load test strap-short 2
ST171 Load test strap 2 ST166 Load test strap-long 2
ST239 Hinge beam 1 ST239 Hinge beam 1
ST240 Hook bolt 1 ST240 Hook bolt 1
ST243 Plunger bracket 1 ST241 Load cell housing 1