26
001
-005
53
-E
N
r
e
v. 5
Service Procedure 11 - Replacing the Base Assembly
1)
Lock the rear casters to make sure the lift stays stable during maintenance.
2)
Dismantle the mast assembly (see “Service Procedure 12 - Replacing the Mast”).
(Note: Leave the actuator attached to mast).
3)
Lock the casters on the new base assembly to make sure the lift stays stable.
4)
Reassemble the mast and boom and DPS/spreader bar assembly on the new base assembly
according to assembly instruction for each component.
5)
Check and adjust the legs (if necessary) as per the “Adjusting the Legs” service procedure
(SP10).
6)
Perform a full feature test as per service procedure 4.
7)
Perform a safe working load test as per service procedure 22.
Warning: If the base assembly is disassembled, it is essential that all components are reinstalled
correctly. If not, the consequence may be later disengagement, which can lead to death or
serious injury.
