Arjohuntleigh Flowtron ACS800, Instructions For Use Manual

Page: 12 / 40

6
3. Controls, Alarms and Indicators
Control Panel With Typical LCD Screen View in Run Mode
On/Off Button
and LED Indicator
Press the On/Off button to power up the pump from its
unpowered state and put it into Standby (refer to
“Standby Screens” on page 11).

Connecting the pump to the mains power supply will
automatically power up the pump from its
unpowered state and put it into Standby, without
having to press the On/Off button.
Make sure the system has been arranged so that the
power cable and garment hoses do not pose a trip or
strangulation hazard.
The adjacent LED indicator shows the pump status:
To switch off the pump, press and hold the On/Off
button for approximately 2 seconds until the LCD screen
goes blank, and then release.
If you switch off the pump and then press the On/Off
button to power it back up:
Stop
2 h
LED Indicator
“Up” Select Button
On/Off Button
LCD Screen
“Down” Select Button Start/Stop Button
Pressure
Mains/Power Indicator
Foot Therapy Indicator
Calf (or Calf & Thigh) Therapy Indicator
Battery Indicator
Start/Stop
Therapy
Indicator
Patient
Hours Meter
LED Colour Mains Power Pump Status
Extinguished Disconnected Off
Amber Connected Off
Amber Connected or disconnected Standby
Green Connected or disconnected Run