Arjohuntleigh Flowtron ACS800, Instructions For Use Manual

Page: 23 / 40

17
• On the “Options” menu, select and confirm
“Audio Alarm Volume” and the “Audio Alarm
Volume” screen is displayed:
• The “tick” on the left side of the screen shows
that the alarm is currently set to High Volume.
• Use the “up” and “down” buttons to select the
new volume setting. Press the “tick” button to
confirm the new volume. The “tick” now shows
the new setting.
• To exit and return to the Standby screen, select
and confirm “Exit”.
• To change another option, select and confirm
“Back” and the “Options” menu is displayed.
2. The Patient Hours Meter settings.
When selected, the Patient Hours Meter shows the
total therapy time at the bottom right of the LCD
screen during therapy.

This is the elapsed time since the Patient Hours
Meter was last cleared using these commands.
To change the settings:
• On the “Options” menu, select and confirm
“Patient Hours Meter” and the “Patient Hours
Meter” screen is displayed:
• A “tick” to the left of “Show Patient Hours”
indicates that the total therapy time is shown in
the bottom right of the LCD screen during
therapy.
• To change this setting, use the “up” and “down”
buttons to make sure the “Show Patient Hours”
Set Volume High
Set Volume Low
Back
Exit
Show Patient Hours
Clear Patient Hours
Back
Exit
Hours Run 00001