Arjohuntleigh citadel Instructions For Use Manual Download

Page: 27 / 76

Citadel Bed Frame System

Foot Pedal for Adjustment of Bed Height (Optional Feature)

Bed height can be adjusted from bed control panels and from the foot pedal

located near the foot end of the bed.

Lift cover of pedal with foot and press left side to raise the bed height. Press

right side of pedal to lower bed height.

Brakes and Steering

Operate the brake pedals with your feet while wearing suitable

shoes. Do not operate the pedals with your hands.

The steering caster may be at either end of the bed, as specified

by the customer.

The pedals have three positions as shown below:

•

BRAKE: brakes are applied on all four casters.

•

FREE: all four casters are free to rotate and swivel.

•

STEER: all four casters can rotate, but the steering caster (see below) is

locked so that it cannot swivel. This helps to keep the bed on a straight

line.

BRAKE

FREE

STEER

Using the Steering Caster

Position the bed so that all the casters line up in the direction of travel. Raise

the pedals to lock the steering caster and move the bed by pushing it from the

opposite end of the steering caster. The steering caster is identified by a yellow

collar at the top of the caster stem.

Figure 16: Bed height foot pedal

Figure 17: Brakes and Steering

Summary of Contents for citadel













































































Search results

Summary of Contents for citadel

Reviews:

Related manuals for citadel

Brands by name

Popular brands

Arjohuntleigh citadel, Instructions For Use Manual

Search results

Summary of Contents for citadel

Reviews:

Related manuals for citadel

Brands by name

Popular brands