16
Citadel Bed Frame System
INSTALLATION
The following chapter describes how to install the bed.
Weighing System Preparation
To prevent damage to the weighing mechanism, replace the
transport locking bolts and washers before transporting the bed.
This is not necessary when moving the bed short distances.
When replacing the transport locking bolts care must be taken to
avoid trapping or damaging any cables.
Position the bed on a flat, level surface and apply the brakes.
Remove the four transport locking bolts (1) and washers (2); there are two
locking bolts at the head end of the bed and two at the foot end.
Figure 3: Removing the transport bolts
Retain the bolts and washers in case the bed needs to be transported at a later
date.
2
1
2
1
